The cover should be installed in the stainless steel chemical equipment reactor. During use, uneven surfaces inside the lid should be avoided. The lid fixed in a carefully arranged storage tank should be slowly tightened according to diagonal and symmetrical regulations.
During use, the stress should be evenly distributed, and the lid should not be tilted on one side to achieve good sealing performance. Only positive and negative connection nuts are available, and the two annular protrusions can rotate relative to each other. All nut connecting components should be coated with lubricating grease.
During the process of using the kettle needle thread seal, simply gently rotating the valve needle can effectively reduce the dust cover and achieve better sealing performance. At the same time, the hand disk of the rotating mechanism can also be effectively used to carry out sealing and verify whether the actual operation is flexible.
The stainless steel reaction kettle control kettle is installed on the work platform. The operating temperature of the machine is 10 to 40 degrees. The air humidity of the new product is less than 85%. The material around the product must not contain conductive smoke or corrosive substances.
The customer needs to conduct a reasonable inspection of the stainless steel reactor. If the fixed contact points between the control panel and the moving components on the board are normal, check if the opening of the top cover is loose and if the contact points of the RF connector are loose. Improper transportation and storage during the actual operation period may lead to damage and corrosion.